{"id":1026,"date":"2023-01-03T10:42:17","date_gmt":"2023-01-03T10:42:17","guid":{"rendered":"https:\/\/digitalspace.bradfordcollege.ac.uk\/10659320\/?page_id=1026"},"modified":"2023-01-31T14:02:10","modified_gmt":"2023-01-31T14:02:10","slug":"logic-mixing-2","status":"publish","type":"page","link":"https:\/\/digitalspace.bradfordcollege.ac.uk\/10659320\/logic-mixing-2\/","title":{"rendered":"Logic: Mixing (Practice)"},"content":{"rendered":"\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

So far I have added reverb, EQ and echo to some of the tracks within the song.I have cut out a lot of high and low frequency with the EQ. have used the EQ on the vocals and the drums to make sure they are not overpowering each other <\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

This is the EQ I ave used for the main vocals. I added some low frequency as the vocals are quite high.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

I have panned the guitars left and right with equal distance so they sound somewhat the same in both the ears.<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

This is the automation of my new mixing track.<\/p>\n\n\n\n

I increased the volume on one of the choruses to make it stand out more. I also increase the volume and filter of the vocals at the end of the track.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

This is the layout of the song so far. cut out the last part of the ending vocals and made a short outdo for the track which has a pitch change, reverb and a filter effect.<\/p>\n\n\n\n

<\/p>\n\n\n\n

These are some of the effects I have used. I lowered the volume and increased the volume on some channels, I added compressor, reverb, pitch shifter and panning to the track. I cut out a lot of the parts where there is no music playing to simplify the track layout.:<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

\"\"
I used compressor to lower the volume on the vocals. The chorus was quite loud in a certain place so I clipped it and used the compressor to lower the volume down to make it more level with the rest of the channel <\/figcaption><\/figure>\n\n\n\n
\"\"
I used reverb to make the vocals sound distant in some places and to make them not sound as dry.I tried to add some predelay on the chorus but I too it off as it was clashing<\/figcaption><\/figure>\n\n\n\n

<\/p>\n\n\n\n

\"\"
I used the filter effect on some extra vocals at the end of the track as a little outro. <\/figcaption><\/figure>\n\n\n\n

<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

I also added a pitch shifter to change it up a bit from the original vocals I increased the pitch by 3 semi-tones and mixed it so it was only the pitched up vocals rather than a mix of both <\/p>\n\n\n\n

Feedback:<\/p>\n\n\n\n

The eq on the vocals was very pleasing to the ear.<\/p>\n\n\n\n

The ending with the pitch shifted vocals was a nice way to end it off.<\/p>\n\n\n\n

The track overall had a little too much reverb.<\/p>\n\n\n\n

The compression sounded very natural.<\/p>\n\n\n\n

NEW MIX<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

At the start I added some colours and chopped some unnecessary sounds out. I then added noise gate to the instruments to cut out the extra sounds that the microphone picked up. I also altered the levels of some of the sections with the mixer. I made sure the sounds weren’t clipping.<\/p>\n\n\n\n

This is the Noise gate for the kick drum. I altered the threshold and the reduction to try cut some sounds out and I also added some release time to make it sounds more real.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

This is the Noise gate for the snare drum. I altered the threshold more as there was a lot of extra sound coming from the channel. I also EQ’d it as the frequency needed altering. I also added some release time to make it sounds more real.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

\"\"
This is the EQ for the snare.I added some low frequency’s<\/figcaption><\/figure>\n\n\n\n

<\/p>\n\n\n\n